8914-I SESSION 03, SOLO, VIEWER # 018

CIA-STARGATE

PDF Scan: PDF

Open AI Summary

This document is a summary of an intelligence session from Project Sun Streak, part of the CIA's Stargate program. The session was conducted solo by Viewer 018 on April 21, 1989. The mission was to describe the unique aspect and function of a target site and provide an overhead sketch. The viewer was tasked with obtaining information about a machine that produces an effect in a silvery block. The summary provides details about the tracker made of the machine, including a thick metallic plate, a power supply in a black container, an enclosed box of electronic circuitry, a working space with a smoky grey plastic cover, and a cylindrical apparatus with bright metallic rectangles. The impression was that many parts of the machine are not used and appear to be "breadboarded" together. The session ended with the tracker page being traced onto a clean sheet. The document is classified and only accessible through special channels.

Text

Body: Approved For Release 2000/08/08 : CIA-RDP96-00789R00050 1 
maMONOWINOFORN 
PROJECT SUN STREAK 
WARNING NOTICE: INTELLIGENCE SOURCE') AND METHODS INVOLVED 
PROJECT NUMBER: 8914-1 
DATE OF SESSION: 890421 
START: 140 
METHODOLOGY: SOLO 
SESSION NUMBER: 3 
DATE OF REPORT: 090424 
END: 1.455 
VIEWER IDENTIFIER: 018 
1. (S/NF/SK) MISSION: Describe the most unique aspect and 
function of the target site and provide an overhead sketch of the 
target area. 
2. (S/NF/SK) VIEWER TASKING: instructions to viewer to obtain 
information about the machine which produces the effect in the 
silvery block described in the last session. 
3. (S/NF/SK) COMMENTS: Note sketch page 6. 010 has answered 
both requirements recommend his role in this project be 
considered cempleted. 
4. EVALUATION: 
HANDLE VIA SKEET CHANNELS ONLY 
SPECIAL ACCESS REQUIRED 
OMPYRETTNOFORN 
CLASSIFIED BY: DIA (DT) 
DECLASSIFY ON: OADR 
Approved For Release 2000/08/08 : CIA-RDP96-00789R000500190011-5 
Approved For Release 2000/08/08 : CIA-RDP96-00789R000500190011-5 
WORKING PAPER 
ProJect: Date: 890421 
890421 
Viewer: 018 
Session: 03 
SUMMARY OF INFORMATION: 
1. A stage 6 "tracker" was made of the "machine" which produces the effect 
in the "silvery block" mentioned in the last session (see page 1A). 
a. (#1 on the tracker page) This point was marked as the beginning of 
the tracker sketch. It has no special meaning. 
b. (#2 on the tracker page) A thick metallic plate on one side of a 
"work" area. The purpose of this plate was not perceived. 
c. (#3 on the tracker page) The power supply. It is enclosed in a 
black container. 
d. (#4 on the tracker page) An enclosed box full of electronic 
circuitry. There was an impression that over half of this circuitry is 
specifically designed for accurate timing. 
e. (#5 on the tracker page) The "working" space (where the silvery 
cube is placed to be changed. This has a smoky grey plastic cover, for the 
operator to watch. 
f. (4:6, 47 and #8 on the tracker page) There is a cylindrical 
apparatus on one side of the "work" area. This cylindrical apparatus is made 
of a front part (#6 and #7) which is a circular arrangement of bright, 
metallic rectangles facing outward, with sunken-in areas of a dark, 
maroonish-brown "waxy" material in between the rectangles. Behind this (on 
the opposite side from the "work" area) is a cylindrical arrangement of 
tubes. These tubes do not appear to be a single tube in a helix, but many 
HANDLE VIA SKEET CHANNELS ONLY 
Approved For Release 2000/08/08 : CIA-RDP96-00789R000500190011-5 
Approved For Release 2000/08/08 : CIA-RDP96-00789R000500190011-5 
J1?
circular tubes, side by side. There is no physical motion (i.e. rotation) to 
this whole apparatus. 
g. 
(#9 on the tracker page) The area not already designated by a 
number appears full of wires, junky-looking equipment (appears electronic) 
and open spaces, allowing one to see all the way through the machine. 
h. There was a general impression that many of the parts of this 
"machine" have covers, but that they are not used. This appears to be a type 
of "breadboarded" setup, "kludging" things together to make them work. This 
is not a machine which one buys ready-made. 
Another impression (this one post session), was that the "work" 
area involves a general "field" which is somehow contained, but that the real 
"business" within that field is a narrow pinpoint area lined up with the 
center point of the cylindrical apparatus. There was the impression that 
this narrow pinpoint can be focused. 
4. At the end of the session, the tracker page was traced onto a clean 
sheet to form a more presentable representation (see page 6). 
HANDLE VIA SKEET CHANNELS ONLY 
(WOW 
Approved For Release 2000/08/08 : CIA-RDP96-00789R000500190011-5 
Approved For Release 2000/08/08 : CIA-RDP96-00789R000500190011-5 I 
vac/ 
/LOW-
je> 
77/41-
/'''r 
k-rer-
?8-24 /LA 
POSIV 
A-tit-2,-6'r' (-
5-6 Li POW 
8 'I( / 
ii-c--Yrv 7 
, 
C.? 
41-c-AP` 
4/ 
V/ 64 
IN/
p e et)J1i 
flevo* s-011,9ei-
Aen ,4/5, 
Approved For Release 2000/08/08 : CIA-RDP96-00789R000500190011-5 
? Approved For Release 2000/08/08 : CIA-RDP96-00789R000500190011-5 
ST4,17- 1" 
/ /a "--c' 
jt) P# e 
Poe-di21 
ez2 
4S.OpIrOlaFor Release 2000/08/08 : CIA-
ottle?er /9,6te-cy3 
91714 19frr--c3 
c_ it.c. rz) eds 
ce)///-7, Jd/t)/